If its glass we can tint it!!! we installed our premium window tint on all windows including the front windshield.

We added a Memphis audio 10” loaded subwoofer enclosure to complimnt he already amazing sound system these rigs come with.

Lastly we installed a super bright 50” dual row curve light bar using brackets made for the Defender and using an interior switch that matched the style of the factory switches.

Some vehicles require a little more work to install an aftermarket radio. We used a high tech installation kit when replacing the out dated factory unit which was able to retain the factory amplifier (and related settings) as well as the climate controls and vehicle information center.

Keep your passengers content with our rear seat screen options, from ceiling mounted drop down systems to seat back tablets and custom headrest monitors designed to match your vehicles interior, we have you covered.

Simple dual 12” sub enclosure with a trim panel built to protect those subs and look good doing it.

Custom JVC touch screen radio install as wells as AD pro audio component speaker set molded into custom fiberglass kick panels.

We went all out on this trunk, from the classic hook and loop carpet to the suede inset side panels.

We cleaned up a this door panel by removing the large speaker pods and going back to a nice clean design.

Hidden behind either side panel is a secondary audio battery and an awesome AD SD2400.5 5-channel amplifier powering this entire system.

We were able to save our customer space while still providing great sound with this custom pocket enlosure paired with our thin 2000 series 10” sub.

This one was LOUD. Customer wanted to maintain the usage of the under-floor storage space but was still looking to move some air so we built a new floor panel for easy access and this nice enclosure filled with 2, 3000 series 12”s powered by a 1500w RMS amplifier.

We can work on just about anything here! This customer was after replacement speakers in his big rig, we got him taken care of.

2 Audio Dynamics 10” subs in a great looking under seat enlosure.

You don’t need to sacrifice seating and space to get great bass.

6.5” pro audio speaker upgrade for this Street Glide, powered by a beefy 800 watt 4 channel amplifier.

We installed a Rockford Fosgate waterproof receiver and our AD super tweeters that fit perfectly in 1998 - 2013 Harley Davidson gauge pods. This Harley is made to be heard.

We designed a pair of 10” sub enclosures for 14 and up HD bags.

These enclosures were made to be removable in a snap if space inside the bags were needed.

Our customer was happy to leave his Camaro with us and was looking for a little extra bass.

We provided that for him with 2, 3000 series 10” sub in a custom enclosure that complimented his car.

These 2 10”s were wired up to a big AD K1500, providing a healthy 1500w RMS to the pair.

Premium ceramic 35% window tint with clear ceramic front windshield for maximum heat rejection and comfort!

Replace your out dated factory stereo with a new radio full of all the tech you need to bring your vehicle up to date.

We added a set of Kenwood Marine 6.5” speakers, wired up to our waterproof Kenwood KMR-XM500.

With bluetooth for wireless audio playback, this simple upgrade was great for our customer.

All to happy to install 2 pair of 6.5” speakers and 10” sub woofers into this boat.

We tinted the front roll-down windows to match the rear with our premium ceramic film. Our customer also was concerned that he couldnt hear his audio system with the top off so we took care of that with a full overhaul while maintaining the factory appearence.

Audio Dynamis 3000 series component speakers.

We paired an impressive 5 channel Kenwood amplifier with a DSP wired to work with the factory radio, powering upgraded front and rear speakers, as well as this awesome 10” tailgate mounted woofer.

Custom amp rack tucked away behind the rear quarter panel plastic houses the 5-channel amp and DSP powering this system.

We were able to cram a 10” JL W7 under the rear seat of this pickup for a customer that wanted allot of bass without getting rid of that extra seating.

Another custom enclsure designed to save space while maximizing output, this build features a Memphis MOJO 10” woofer, VIVBelle 5 channel amplifier, an VIV 6.5” component door speakers.

This Enclosure is ported - vented through the side for maximum stealth as well as output.

With an integrated amp rack, this build was very clean and was just what the customer was after.

Simple single 12” sub enclosure saving space and keeping the trunk cleaned up.

We thought that the new 400Z should have a little more thump to match the awesome energy these cars have about them.

Building a new floor and mounting the sub and amp underneath created an awesome clean build that didnt take away from the trunk space.

Our 10” 2000 series thin sub is powered perfectly by a Kenwood 500 watt amplifier

If you’re looking to get the ultimate UV and heat rejection but don’t want a dark windshield ask us about our clear ceramic film.

Premium ceramic window tint was installed all around to complete the "incognito" look as well as a custom sub enclosure fitted with 2 12" Audio Dynamics woofers.

We added a pair of the 3000 series 12" subs installed seamlessly to the factory radio in this Lexus

We competed the second stage of this Nova build. this included a fresh new carpet kit with matching floor mats, trunk liner carpet, TMI bucket seats and matching center console.

Removed the ratty old vinyl trunk liner and replaced with this premium hook and loop carpet liner that matches the front.

Fitted these awesome TMI bucket seats with center console. These are an amazing way to improve your old school and gain a ton of leg room for us tall guys.

We built a custom enclosure to fit some great sounding Memphis MOJO Pro woofers and showcase both 4 channel and mono amplifiers.

As well as the custom trunk setup, we replaced all interior speakers, installed a new radio with Apple Carplay and Android Auto, and installed some ambient lighting throughout.

We did an overhaul of the existing audio system in this towboat. 4 interior 6.5” speakers and 4 10” towers.

3 X amplifiers powering all speaker in the boat.

3 X amplifiers powering all speaker in the boat.

4 X Wet Sounds Revo 10” Towers

We took care of the audio in this mint Camaro with a Kenwood touchscreen along with 4 channel amplifier powering 4 6.5 coax speakers.

Dash kit converting factory din and a half stereo to full ddin opening!

Under seat Memphis 4 channel amplifier

Wet Sounds equipment installed throughout

in addition to the 6-channel Wet Sounds amplifier that was already installed, we put in a sub amplifier to power the 3 Wet Sounds Recon series woofers properly.

For the rear swim platform we added a set of Wet Sounds Recon series 8” coax speakers and another free-air woofer.

We added an additional set of Wet Sounds Recon series 6.5” speakers to the bow

Full Wet Sounds Recon setup throughout